Call us to check the inventory before you place an order!
– Installation Diagram
The Midnite Solar Classic lines of MPPT charge controllers will substantially increase the flexibility, features and range currently found on MPPT controllers. The MidNite Classic charge controller is unique in its ability to be used for a great variety of DC input sources. It is designed to regulate DC input from PV, and Approved Hydro and Wind turbines. The Classic 150, 200 and 250 are designed to work with 12, 24, 36, 48, 60 and 72 volt battery banks. The Classic and Classic Lite 250KS are designed to charge up to a 120V nominal battery bank. With the Classic 150 ranging up to 96 amps, the Classic 200, 79 amps and the Classic 250, 63 amps, why would you need any other controller? MidNite Solar has doubled its factory floor space for production of the Classic line of charge controllers, making the Classic the only real "Made in America" charge controller. The Classic standard models are the only MPPT controllers with built-in Arc Fault Detection, making them the safest controllers available.
4AWG RW90 (RED) Wire (95 Amp Rating)
(Sold Per Foot)
4AWG RW90 (Black) Wire (95 Amp Rating)
Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV) breakers or two 600 VDC fuse holders. With modifications to the deadfront 3 dinrail fuse holders can be used. Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar. Punch out tabs on the plastic deadfront make for a clean installation using circuit breakers. An included vsnap in adapter makes for a professional looking installation when installing fuse holders. A single 300VDC breaker from 7 to 50 amps may be installed as a disconnect (no combining busbar) . The enclosure may be mounted to a pole or wall indoors or out.
Photovoltaic (PV) Array Breakers PV breakers are Hydraulic-Magnetic type and are not affected by high ambient temperatures. All breakers have a 2 year warranty.
These breakers can accept wire sized AWG #6 through AWG#14. They will fit in enclosures with din rail such as: Outback Flexware PV8,Flexware PV12, Midnite MNPV3, Midnite MNPV6, Midnite E-Panel, Midnite Mini DC, and Midnite Baby Box.
These breakers can accept wire sized AWG #6 through AWG #14. They will fit in enclosures with din rail such as: Outback Flexware PV8,Flexware PV12, Midnite MNPV3, Midnite MNPV6, Midnite E-Panel, Midnite Mini DC, and Midnite Baby Box .
3/8" Strain Relief Connector (metal boxes)
1" Strain Relief Connector (metal boxes)
Ring Terminal, 6AWG, 5/16 Ring Size, with PVC cover
Black Zip Ties w/screw hole
Wood Screw (Black)
There are no reviews yet.
Your email address will not be published. Required fields are marked *
Your review *
Fill out the form below and one of our experts will get back to you as soon as possible.
Otherwise, give us a call at: 1-888-800-0010 to talk to our team of experts.