Wind Power Accessories

Showing all 12 results

  • AIR Wind Turbine Nose Cone

    AIR Wind Turbine Nose Cone

    $29.95

    AIR Wind Turbine Nose Cone

    There are 3 different nose cones for each of our AIR and BREEZE units. Please specify which unit it is for.

    SKU: 17-PW-NC0001 Category:
    $29.95
    Add to cart
  • Blade Set for AIR 40 & Breeze Wind Turbines

    Blade Set for AIR 30 Wind Turbine

    $159.95

    Blade Set for AIR 30 Wind Turbine

    These injection-molded composite blades are high quality and will flex in high winds to protect from breakage. If one of the blades on your AIR 30 is damaged, the set of 3 has to replace all the blades. This is because the blades are balanced as a set and singles will not work with a different set.

    SKU: 17-PW-BB0001 Category:
    $159.95
    Add to cart
  • Blade Set for AIR 40 & Breeze Wind Turbines

    Blade Set for AIR 40 & Breeze Wind Turbines

    $149.95

    Blade Set for AIR 40 & Breeze Wind Turbines

    These injection-molded composite blades are high quality and will flex in high winds to protect from breakage. If one of the blades on your AIR 30 is damaged, the set of 3 has to replace all the blades. This is because the blades are balanced as a set and singles will not work with a different set.

    SKU: 17-PW-BS0001 Category:
    $149.95
    Add to cart
  • 08-MD-15KACC

    Midnite 1.5KW AC Clipper for Wind and Hydro

    $1,624.95

    Midnite 1.5KW AC Clipper for Wind and Hydro

    The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a stand alone self powered adjustable max VOC limiting circuit. The AC Clipper is designed to work with AC turbines and was designed for up to 1.5kw maximum turbines. The 1.5K AC Clipper comes standard with 2 ohms of resistance per phase. We can custom build other resistance values upon request and have designed an easy to change resistor insert for the Clipper allowing changes in the field.

     

    SKU: 08-MD-15KDCC Categories: ,
    $1,624.95
    Add to cart
  • 08-MD-15KACC

    MIDNITE 1.5kW DC CLIPPER for WIND and HYDRO

    $1,549.95

    MIDNITE 1.5kW DC CLIPPER for WIND and HYDRO

    The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a standalone self-powered adjustable max VOC limiting circuit. The DC Clipper is designed to work with DC turbines and was designed for up to 1.5kw maximum turbines. The 1.5K DC Clipper comes standard with 2.4 ohms of resistance. We can custom build other resistance values upon request and have designed an easy to change resistor insert for the Clipper allowing changes in the field.

     

    SKU: 08-MD-15KACC Categories: ,
    $1,549.95
    Add to cart
  • 08-MD-40KACC

    Midnite 4.0KW AC Clipper for Wind and Hydro

    $1,549.95

    Midnite 4.0KW AC Clipper for Wind and Hydro

    The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a stand alone self powered adjustable max VOC limiting circuit. The AC Clipper is designed to work with AC turbines and was designed for 3-4kw maximum turbines. The AC Clipper comes standard with 1.6 ohms of resistance per phase. We can custom build other resistance values upon request and have designed an easy to change resistor insert for the Clipper allowing changes in the field.

     

    SKU: 08-MD-40KACC Categories: ,
    $1,549.95
    Add to cart
  • 08-MD-40KACC

    Midnite 4.0KW DC Clipper for Wind and Hydro

    $1,549.95

    Midnite 4.0KW DC Clipper for Wind and Hydro

    The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a stand alone self powered adjustable max VOC limiting circuit. The AC Clipper is designed to work with AC turbines and was designed for 3-4kw maximum turbines. The AC Clipper comes standard with 1.6 ohms of resistance per phase. We can custom build other resistance values upon request and have designed an easy to change resistor insert for the Clipper allowing changes in the field.

     

    SKU: 08-MD-40KDCC Categories: ,
    $1,549.95
    Add to cart
  • 08-PW-TK2700

    Primus 27 Foot Guyed Tower Kit

    $324.95

    Primus 27 Foot Guyed Tower Kit

    This tower kit is designed specifically for the Primus Wind Power AIR 30 and AIR 40 wind turbines. To our knowledge this is the most economical and user friendly tower kit available for the “AIR” wind turbines. Guy wire supported construction allows the use of lightweight tubing while providing plenty of strength for all but hurricane conditions. Two people can easily erect a tower with this kit in an hour or so. Since the turbine and the tower kit are light in weight, no winches, vehicles or beasts of burden are needed to erect the tower. All that is required is a little
    bit of “elbow grease”. We recommend that at least two people be present when the tower is raised, although it is conceivable that a single person could actually raise a tower on their own.

     

    SKU: 08-PW-TK2700 Category:
    $324.95
    Add to cart
  • 08-PW-TK29EZ

    Primus 29 Foot EZ Tower Kit

    $1,095.95

    Primus 29 Foot EZ Tower Kit

    The EZ Tower™ is designed specifically for Primus Wind Power, Inc. AIR family of small wind turbines. This guy-wire supported tower uses lightweight tubing while providing plenty of strength. Two people can easily erect this tower in about an hour. Because the wind turbine and EZ Tower™ are lightweight, no winches or vehicles are needed to erect the tower. The EZ Tower™ includes a simple yet effective tower base and anchoring system.

     

    SKU: 08-PW-TK29EZ Category:
    $1,095.95
    Add to cart
  • 08-PW-TK4500

    Primus 45 Foot Guyed Tower

    $599.95

    Primus 45 Foot Guyed Tower

    This tower kit is designed specifically for the Primus Wind Power AIR 30 and AIR 40 wind turbines. To our knowledge this is the most economical and user friendly tower kit available for the “AIR” wind turbines. Guy wire supported construction allows the use of lightweight tubing while providing plenty of strength for all but hurricane conditions. Two people can easily erect a tower with this kit in an hour or so. Since the turbine and the tower kit are light in weight, no winches, vehicles or beasts of burden are needed to erect the tower. All that is required is a little
    bit of “elbow grease”. We recommend that at least two people be present when the tower is raised, although it is conceivable that a single person could actually raise a tower on their own.

     

    SKU: 08-PW-TK4500 Category:
    $599.95
    Add to cart
  • 08-PW-CP1024

    Primus Wind Control Panel

    $299.95

    Primus Wind Control Panel

    Primus Wind Power is pleased to offer a low cost analog control panel for use with AIR Breeze and AIR 40 12 VDC wind turbines. The panel is easy to install and will result in a professional operator station enhancing the beauty and value of your vessel or home installation. It helps to reduce installation costs and makes wiring a snap with just 4 wires to connect. The panel is available in a 25A version that will support 12 volt systems for AIR Breeze or AIR 40 Wind Turbines.

     

    SKU: 08-PW-CP1024 Category:
    $299.95
    Add to cart
  • 08-PW-STOPS1

    Stop Switch for AIR Wind Turbines

    $69.95

    Stop Switch for AIR Wind Turbines

    $69.95
    Add to cart